Classification of main stone products in China _4

hfg7b5Fte

3 to the profile control: for in the middle of the blank tile marble composite coat plate installed in the horizontal cutting machine,hogan interactive outlet, to analyse for two side as a blank tile while the other side marble marble wool composite plate. Using the level of cutting machine. The machine consists of two groups of different spacing of saw blade, before a group of two blades between the serrated distance 20cm, a group of the sawblade close to and not touching, two groups of saw blade between the distance of 15cm, two groups of saw blade by leveling in the same horizontal plane, the composite wool board through the conveying belt in the two groups before and after level saw blade for cutting into two pieces of marble complex,nike tn requin soldes,
composite board.
4 thickness control for marble composite wool board is composed of marble, adhesive and blank tiles, it is inevitable that the thickness difference. Therefore, it is necessary to control the thickness of. The marble composite wool board of the marble side up, through the thickness of the control machine to achieve the same thickness.
5) grinding and polishing: after controlling the thickness of the marble composite wool board marble and up to ten consecutive grinding and polishing, become a very high gloss marble composite wool board.
6) cut and the back edge: after grinding and polishing the marble composite board is cut into 600*600mm specifications of the composite board, and then the edge of the four sides, it has become a marble composite plate.
7) test package. The thickness of the finished marble composite plate is 13mm, and the thickness of the marble is only 2 to 3mm. The marble composite plate packaging, packing can be sold. Production process of
(three) high quality table panel
panel production needs more, so here to focus on its production process. To produce high-quality,chaussure nike tn, customer satisfaction of the Taiwan panel products, as long as the production process, reasonable plan, arrange for the implementation, follow-up checks will be able to enter the normal production track.
1) first of all, to clear the process: selecting a material, row material, material (circular saws, saw cutting, polishing, infrared bridge cutting, the Taiwan panel processing workshop, bonding (bovine, ogee, flat side, etc.), machine processing shaped edge (ogee, Fortunearia edge), dig basin hole slot, drilling, grinding, examination,air max 1 pas cher, door, packaging, delivery.
2) selecting,chaussure louboutin pas cher, row material: according to customers with the protocol board (sample), the control board agreement with the raw material blocks, and knock a hand grinder for grinding control, inspect the color, the pattern, the particle is consistent. To pay attention to the selection process, if this part of the problem, the next step to all downtime. Blocks with water spray method and visual method test its quality, should be chosen in the same area, the same color, patterns, particle, density consistent; from the appearance, does not allow cracks, chalcanthitum, color line, sweeping and other flowers such as impurities, the production task list the number of reasonable layout.
3) cutting and unloading: the blocks on a circular saw, by drawing and discharging requirements sawing cutting, then saw the wool board for approval,chaussure supra pas cher, will unqualified cleaning products, qualified products put on the rack to be transferred to the next procedure; put in another iron thickness more than standard products, to be transferred to the next procedure thickness.
>Related Articles：

  
   The night
  
   
  
   Wait, wait for the next life
  

   Check this period of time to do what it: as a part-time job for several days, but in the end did not go, but to the very full, and didn't go to reason is because the weekend by Mami's introduction to the children's Museum on the bench to the instructor, the title of the report check pass mode and so on, no technical content of work, but we are really busy 2, 3 night, weekend to children's Museum, two days day labourers, no technical content, but quite busy; "I am special forces" to review again, and will give me impressed lines extracted, then spent three nights carefully wrote an article for up to five or six thousand words.